UNI 50 Dip Tank (50 Gallons)

$1,363.15
Shipping calculated at checkout.

A 50 gallon dip tank made of white, welded 1/2" polypropylene, with a 3/4" drain. 

Tank Includes:

  • Tank lid and screen hold down rod
    Dimensions & Weight
    • Inner dimensions: 37"W x 13"D x 28.5"H
    • Outer dimensions: 42"W x 18"D x 29"H
    Chemical Recommendations

    1:7 Chemical to Water Ratio Using EasiStrip SUPRA

    • UNI50 (50 Gallon Dip Tank)
    • 6 gallons of EasiStrip SUPRA One Step Ink Cleaner & Emulsion Remover
    • Up to 42 Gallons of Water
    Instructions

    Scrape as much ink out of your screen, dip your frame in your tank for 1-3 minutes (just enough time to soften your emulsion), bring to your washout booth and high pressure rinse both sides of the screen. Your screen will then be ready for the stain removal process.

    1. Scrape as much ink off of your screen as possible
    2. Place screen in your dip tank and let it soak for roughly 2-3 minutes
    3. Pull the screen out of the dip tank and allow excess fluid to drain back into the tank
    4. Bring your screen to your washout booth
    5. High Pressure rinse emulsion off of the screen
    6. Apply EasiSolv 701 Screen Wash & Stain Remover (with Degreasers) to both sides of your screen and scrub
    7. High pressure rinse the excess ink and stains from your screen
    8. Low pressure/flood rinse your screen to remove any excess chemical from the mesh
    9. Dry your screen - it will then be ready for reuse