Technical Data Sheets
Review technical specifications, performance data, application and use instructions for Easiway chemicals.
EasiSolv™ 401N Squeegee and Floodbar wash is designed to remove plastisol, solvent and UV inks from squeegees, floodbars and other shop tools.
Compatible Ink Types:
- Plastisol
- UV
- Solvent
Learn More >
EasiSolv™ 110 Solvent Cleaner is a quick-drying cleaner formulated to effectively dissolve and remove printing inks from screen printing mesh, squeegees, flood bars, presses, pad printing tools, rotary screens, and more. The combination of components is designed to solubilize and remove virtually every type of ink and minimize any remaining stains in the printing mesh.
Compatible Ink Types:
- Plastisol
- UV/Solvent
- Industrial
EasiSolv™ 120 Solvent Cleaner is a quick-drying cleaner formulated to effectively dissolve and remove printing inks from screen printing mesh, pad printing tools, squeegees, flood bars, and presses. The combination of components is designed to solubilize and remove virtually every type of ink and minimize any remaining stains.
Compatible Ink Types:
- Plastisol
- UV/Solvent
- Conductive
- Industrial
EasiSolv 140 solvent cleaner is designed to effectively break down and dissolve all types of printing inks from screen mesh, squeegees, flood bars, pad printing tools, ink scrapers, tools, frames, presses, and more.
Compatible Ink Types:
- Plastisol
- UV/Solvent
- Conductive
- Industrial
EasiSolv™ 415N Stain & Haze Remover is an environmentally approved, 100% active, fast-acting, low odor, ready-to-use liquid designed to quickly and thoroughly dissolve all ink stains, emulsion residue/stains, and ghost images from all types of screen printing mesh. EasiSolv 415N will remove all stains created by solvent, water base, UV, and textile inks with fewer hazards and less mesh destruction than harsh ghost and haze removers.
Compatible Ink Types:
- Plastisol
- Silicone
- Waterbased
- UV/Solvent
- Conductive
- Industrial
EasiSolv™ 5 Stencil Remover is a non-hazardous, liquid, concentrated solution with additives designed to aggressively dissolve direct, direct/indirect emulsions, as well as capillary films. Mixes with water up to 1:4. When rinsed with high-pressure water emulsion and capillary films will be easily removed and the printing mesh will be fully degreased and ready to be recoated. This product has zero VOCs.
Compatible Ink Types:
- Plastisol
- Silicone
- Waterbased
- UV/Solvent
- Conductive
- Industrial
EasiSolv™ 51 Stencil Remover is a liquid, ready-to-use stencil remover/degreaser. This product was developed for use where premixing with water is not practical. EasiSolv 51 quickly and effectively dissolves all direct emulsions, direct/indirect stencils as well as capillary films. This product has no VOCs.
Compatible Ink Types:
- Plastisol
- Silicone
- Waterbased
- UV/Solvent
- Conductive
- Industrial
EasiSolv™ 55 Stencil Remover Concentrate is a revolutionary, highly concentrated, extremely cost-effective, liquid solution designed to aggressively dissolve direct, direct/indirect emulsions, as well as capillary films, dual-cure systems, pure photopolymer, and direct projection emulsion systems. EasiSolv 55 Stencil Remover Concentrate will dissolve stencils and provide easy washout with water from all types of screen mesh. This product has no VOCs.
Compatible Ink Types:
- Plastisol
- Silicone
- Waterbased
- UV/Solvent
- Conductive
- Industrial
EasiSolv™ 500 Stencil Remover Concentrate is a revolutionary, liquid, emulsion remover concentrate that is engineered to quickly and aggressively dissolve all direct emulsions, capillary, and high-density films with ease. Mixes with water 1:10 and up to 1:50.
Compatible Ink Types:
- Plastisol
- Silicone
- Waterbased
- UV/Solvent
- Conductive
- Industrial
EasiSolv 601 Screen Wash & Stain Remover is designed to dissolve all types of ink from the screen printing mesh before removing the emulsion. This product is applied to the screen printing mesh and rinsed with water. It also contains surfactants that degrease the screen printing mesh when used as a final step in the reclaiming process.601is an Easiway-approved stain remover, dissolving ink stains, emulsion residue stains, and ghost images from the screen printing mesh.
Compatible Ink Types:
- Plastisol
- Waterbased
- UV/Solvent
- Conductive
- Industrial
EasiSolv 630 Ink Remover & Automated Ink Wash is designed to dissolve all types of ink from the screen printing mesh before removing the emulsion. This product is applied to the screen printing mesh and rinsed with
water. 630 Should be used at 100% strength in automated equipment. This provides ease of use for re-filling and topping up equipment.
Compatible Ink Types:
- Plastisol
- Waterbased
- UV/Solvent
- Electronic
EasiSolv 680 Ink Remover & Screen Wash is a new to the market, industry-changing product designed to dissolve all screen printing inks. The versatility of this product makes it a great choice for removing ink from screen mesh before emulsion removal and removing stains from mesh after emulsion removal. In addition, 680 is formulated to include degreasers, eliminating the need for an additional product in the reclaim process.
680 is a non-foaming ink remover, this makes it a great choice for removing ink in an automatic screen reclaiming machine and eliminates the need for a bubbler if used with a spray gun system.
Compatible Ink Types:
- Plastisol
- Silicone
- Waterbased
- UV/Solvent
- Conductive
- Industrial
EasiSolv 700 Screen Wash is designed to perform in enclosed, automatic screen washing systems. This product is used to dissolve all types of ink from the screen printing mesh before removing the emulsion. It also contains
surfactants that degrease the screen printing mesh when used as a final step in the reclaiming process. This product does not remain homogenous, the entire container must be emptied into your machine per use for ultimate performance.
EasiSolv™ 701N Screen Wash and Stain Remover (with degreasers) is an environmentally approved, 100% active, low odor, extremely quick penetrating, and fast-acting solvent designed to dissolve and clean virtually all types of screen printable inks, adhesives, clear coatings, and stains from printing mesh. Plastisol, UV/solvent, conductive and industrial inks are quickly dissolved with EasiSolv 701N without the hazards and odors usually associated with aggressive solvents and caustic stain/haze removers. EasiSolv 701N works quickly and causes no damage to printing mesh when used as a stain remover.
EasiSolv 701N has built-in degreasers eliminating the need for an additional degreasing product as your final step in reclaim.
Compatible Ink Types:
- Plastisol
- UV/Solvent
- Conductive
- Industrial
EasiSolv 722 Screen Wash & Stain Remover is designed to dissolve silicone ink from the screen printing mesh before removing the emulsion. This product is applied to the screen printing mesh and rinsed with water. It also contains surfactants that degrease the screen printing mesh when used as a final step in the reclaiming
process. 722 is an Easiway approved stain remover, dissolving silicone stains, emulsion residue and stains and ghost images from the screen printing mesh. This product does not contain APEO, making it compliant with many restricted substance lists; including Nike, Gildan, VF, Levi Strauss.
Compatible Ink Types:
- Silicone
EasiSolv 770 Screen Wash is designed to dissolve plastisol and UV inks from the screen printing mesh before removing the emulsion. This product is applied to the screen printing mesh and rinsed with water. It also contains surfactants that degrease the screen printing mesh when used as a final step in the reclaiming process.
Compatible Ink Types:
- Plastisol
- Waterbased
- UV/Solvent
- Electronic
PlastiSolv™ 810 Press Wash is a workplace approved, 100% active, odor free plastisol ink remover which can be used at the press and in the reclaim area. PlastiSolv 810 cuts ink lighting fast and dries quickly for on press color changes, screen opening or saved screens.
Compatible Ink Types:
- Plastisol
PlastiSolv 842 On Press Cleaner is designed to remove plastisol ink from the screen printing mesh. This product evaporates quickly and should not be rinsed with water. 842 is to be used during on press color changes, saved screens, removing ink from squeegees, floodbars and other equipment.
Compatible Ink Types:
- Plastisol
EasiStrip Supra One Step Ink Cleaner & Emulsion Remover is designed to dissolve plastisol inks and remove emulsion from the screen printing mesh-at the same time. This product is for use in a dip tank-for superior time and chemical savings. EasiStrip Supra is an ultra- concentrated liquid and designed to be mixed with water 1:5 while remaining homogenous.
Compatible Ink Types:
- Plastisol
EasiSolv™ Screen Perfect is a ready to use liquid which provides a revolutionary, radical approach to preparing mesh for emulsion coating and film application. This unique union of water based polymeric components will
simply eliminate many of the common problems experienced in screen making.
EasiSolv 930 Screen Wash is designed to dissolve plastisol and UV inks from the screen printing mesh before removing the emulsion. This product is applied to the screen printing mesh and rinsed with water. It also contains surfactants that degrease the screen printing mesh when used as a final step in the reclaiming process.
Compatible Ink Types:
- Plastisol
- UV
EasiSolv 1028 Ink Cleaner & Emulsion Remover is a ready to use product designed to dissolve plastisol and UV inks and remove emulsion from the screen printing mesh-at the same time. This product can be mixed with water
and used in a dip tank-for superior time and chemical savings.
Compatible Ink Types:
- Plastisol
- UV
EasiSolv™ C29 Ink & Emulsion Remover is a revolutionary product to address the low VOC restrictions on solvent based screen cleaning products in California. By combining ink removal and emulsion removal in one step, EasiSolv C29 meets the most strict VOC legal limits of 100 grams/liter, while reducing labor and the number of products required to reclaim a screen.
Compatible Ink Types:
- Plastisol
- UV/Solvent
- Waterbased
EasiSolv™ GOLD Stain Remover is used to dissolve all ink stains, emulsion residue/stains and ghost images from the screen printing mesh.
EasiSolv™ C99 Press Wash is a revolutionary product designed to address the low VOC restrictions on solvent based screen cleaning products in California. This product is a California Compliant (100 grams/liter VOC or less),
environmentally approved, highly active liquid product to be used for ink removal at the press. Easisolv C99 cuts ink fast and is great for on press color changes, screen opening or saved screens.
EasiSolv C35 Screen Wash & Stain Remover is designed to dissolve plastisol and UV inks from the screen printing mesh before removing the emulsion. This product is applied to the screen printing mesh and rinsed with water.
It also contains surfactants that degrease the screen printing mesh when used as a final step in the reclaiming process. C35 is an Easiway approved stain remover, dissolving ink stains, emulsion residue and stains and ghost
images from the screen printing mesh. This product has less than 100 grams per liter VOC content.
EasiSolv 415N will remove all stains created by solvent, water base, UV, and textile inks with fewer hazards and less mesh destruction than harsh ghost and haze removers.
Compatible Ink Types:
- Plastisol
- UV/Solvent
- Industrial
