EasiSolv™ 5 Stencil Remover

Shipping calculated at checkout.
Size: Quart

Concentrated emulsion remover that is designed to dissolve direct, direct/indirect emulsions, as well as capillary films. Mixes with water up to 1:4.

Description & Features

EasiSolv™ 5 Stencil Remover is a non-hazardous, liquid, concentrated solution with additives designed to aggressively dissolve direct, direct/indirect emulsions, as well as capillary films. Mixes with water up to 1:4.

When rinsed with high-pressure water emulsion and capillary films will be easily removed and the printing mesh will be fully degreased and ready to be recoated. This product has zero VOCs.


  • Mix with water 1 part chemical to 4 parts water.
  • Zero VOCs
Ink Compatibility
  • Plastisol
  • Waterbased
  • Silicone
  • UV/Solvent
  • Conductive
  • Industrial
Safety & Technical Data Sheets

Download > Safety Data Sheet

Download > Technical Data Sheet

Size: Quart

Directions for Use

  1. Apply EasiSolv 5 by brush, wipe, scrub pad, or spray to both sides of emulsion/film, after the ink has been removed.
  2. High-pressure rinse on both sides of the screen.
  3. Flood rinse the entire screen with a low-pressure rinse from the top to remove any debris, splashback, and chemical residue. 

If stubborn stains remain, apply an Easiway Systems, Inc.-approved stain remover and high-pressure rinse. 

Technical Data Info


Clear Liquid





Flash Point




DOT Shipping

This product does not ship hazardous.

Safety Precautions

Product Identifier: EasiSolv 5 Stencil Remover Concentrate

General Use: Emulsion Remover


If medical advice is needed, have product container or label at hand. Keep out of reach of children. Read label before use.

Wash skin thorougly after handling. Wear protective gloves/protective clothing/eye protection/face protection.

IF SWALLOWED: rinse mouth. Do not induce vomiting.

IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with water/shower.

IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Immediately call a doctor, a poison center. Get medical advice/attention if you feel unwell. Specific treatment (see supplemental first aid instructions on the label or this SDS).

Do not induce vomiting. Wash contaminated clothing before reuse.

Store locked up. Dispose of contents/container in accordance with local/regional/federal regulations.

ChemTel USA, Canada, Puerto Rico & U.S.Virgin Islands: (800)-255-3924 

MANUFACTURER +1(813) 248-0585 

ChemTel International (Call Collect)

Easiway Systems Contract Number: MIS3609005