VersaSolv™ Screen Wash is an environmentally approved, water dilutable concentrate. It is a low VOC, extremely quick penetrating and fast acting screen wash designed to dissolve and clean plastisol and UV screen printable inks and stains from printing mesh without the hazards and odors usually associated with aggressive solvents. This product is applied to the screen printing mesh and rinsed with water. It also contains surfactants that degrease the screen printing mesh when used as a final step in the reclaiming process. This product is a concentrated liquid and can be mixed with water while remaining homogenous. When mixed with water, this product has less than 100 grams per liter VOC content.
VersaSolv is a concentrate which may be mixed with up to 4 parts water for ultimate economy.
VersaSolv dissolves plastisol and UV inks and stains quickly, allowing mesh to be rinsed clean
When mixed with water, VersaSolv will remain homogeneous, and not separate over time.
VersaSolv is a low odor product, providing a more pleasant environment for employees.
VersaSolv is non-flammable which makes it safer for handling, storage
and rag disposal than conventional screen washes.
VersaSolv contains low-foam detergents which contribute to superior ink and
stain removal, while providing complete rinsability with water.
VersaSolv may be applied manually or recirculated through the EasiFlo™ System, or in an
enclosed, automatic screen washing system, providing superior product life and economy.
Application for Use as a Screen Wash:
Scrape excess ink from screen.
Apply VersaSolv to the ink and print side of the screen. Scrub.
Using a good high pressure washer, spray rinse the screen starting at the bottom of the ink side and work up. Give good attention to the image area of the screen. Rinse the print side of the screen, followed by a slow or flood rinse to activate degreasing agents.
Apply an Easiway Systems approved emulsion/stencil remover. The screen will now be ready for reuse.
If stubborn stains remain, apply VersaSolv again or an Easiway Systems approved stain remover and high pressure rinse.
Application for Use as a Stain Remover with Degreasers:
Remove all ink and emulsion from screen.
Apply stain remover to the (well) ink and print side of the screen, scrub.
Using a high pressure washer, rinse the screen starting at the bottom of the ink side and work up. Give good attention to the image area of the screen. Rinse the print side of the screen, followed by a slow or flood rinse to activate degreasing agents. The screen will now be ready for reuse. There is no need to use an additional degreaser.