There are no items in your cart.
Ink & Emulsion Removers
Ink & Emulsion Removers
EasiSolv™ C35 Screen Wash & Stain Remover
EasiSolv™ C35 Screen Wash & Stain Remover is a low VOC (100 grams/liter VOC or less), highly active liquid product to be used for ink removal or as final reclaiming step; stain removal/degreaser. When used on stains, this product is non caustic, will not damage mesh and is extremely cost effective.
SPECIAL FEATURES
EasiSolv C35 has a VOC of less than 100 grams/liter, making it compliant in areas where VOC limits are the most strict.
EasiSolv C35 dissolves all inks and ink stains quickly, allowing mesh to be rinsed clean with water.
EasiSolv C35 is a low odor product, providing a more pleasant environment for employees.
EasiSolv C35 is non-flammable (flash point of >200 °F) which makes it safer for handling, storage and rag disposal than conventional screen washes.
EasiSolv C35 contains low-foam, biodegradable detergents which contribute to superior ink and stain removal, while providing complete rinseability with water.
EasiSolv C35 may be applied manually, recirculated through the EasiFlo™ System or recirculated in enclosed, automatic screen washing systems, providing superior product life and economy.
EasiSolv C35 may be applied to a wet screen for use as a stain remover, without causing damage to the mesh.
APPLICATION
Application for Use as a Screen Wash:
- Scrape excess ink from screen.
- Apply EasiSolv C35 to the (well) ink and print side of the screen. Scrub if necessary.
- Squeegee excess off screen.
- Using a good high pressure washer, spray rinse the screen starting at the bottom of the well side and work up.
- Give good attention to the image area of the screen. Rinse the print side of the screen.
- Apply an Easiway Systems, Inc. approved emulsion/stencil remover. The screen will now be ready for reuse.
Application for Use as a Stain Remover with Degreasers:
- Remove all ink and emulsion from screen.
- Apply stain remover to the (well) ink and print side of the screen, scrub.
- High pressure rinse both sides of screen, followed by a slow or flood rinse to activate degreasing agents. Screens are then cleaned and ready for use.
