There are no items in your cart.
Home Page
Home Page
EasiSolv™ C29 Ink Cleaner & Emulsion Remover
EasiSolv™ C29 Ink Cleaner & Emulsion Remover is a revolutionary product to address the low VOC restrictions on solvent based screen cleaning products. By combining ink removal and emulsion removal in one step, EasiSolv C29 meets the most strict VOC legal limits of 100 grams/liter, while reducing labor and the number of products required to reclaim a screen.
SPECIAL FEATURES
EasiSolv C29 has a VOC of less than 100 grams/liter, making it compliant in California where VOC limits are the most strict.
EasiSolv C29 dissolves and cleans ink, emulsion & blockout in one step which makes the job of screen reclaiming much faster and more efficient.
EasiSolv C29 has no odor which makes the job of screen reclaiming much more pleasant.
EasiSolv C29 works on virtually all inks and emulsions, allowing mesh to be rinsed clean with water.
APPLICATION
Application for Manual Use:
Scrape excess ink from screen.
Wet both sides of screen with water.
Apply EasiSolv C29 by brush, wipe, scrub pad or spray to the print side of screen and scrub.
Apply to the ink (well) side of screen and scrub.
High pressure rinse from the well side followed by high pressure rinse from the print side, giving good attention to the image area and frame.
Flood rinse entire screen with low pressure water.
If stubborn stains remain, apply an Easiway approved stain remover and high pressure rinse.
Application for use in a Dip Tank:
Mix EasiSolv C29 at a ratio of up to 1:3 with water in a plastic tank.
Scrape excess ink from screen.
Place screen in dip tank.
Let soak in tank until the emulsion/film loosens from screen, usually just a couple of minutes.
High pressure rinse screen, then flood rinse.
