EasiSolv™ 140 Solvent Cleaner

$56.49
Shipping calculated at checkout.
Size: Gallon

Solvent cleaner that is designed to effectively break down and dissolve all types of printing inks from screen mesh, squeegees, flood bars, pad printing tools, ink scrapers, tools, frames, presses, and more.

Description & Features

EasiSolv™ 110 Solvent Cleaner is a quick-drying cleaner formulated to effectively dissolve and remove printing inks from screen printing mesh, squeegees, flood bars, presses, pad printing tools, rotary screens, and more. The combination of components is designed to solubilize and remove virtually every type of ink and minimize any remaining stains in the printing mesh.     

Features

  • Low Flash Point
  • Low Odor
  • Quick Evaporation
  • Good Adhesive Remover
  • Non-Hazardous

Ink Compatibility
  • Plastisol
  • UV/Solvent
  • Industrial
Safety & Technical Data Sheets

Download > Safety Data Sheet

Download > Technical Data Sheet

Size: Gallon

Directions for Use

** This product is meant to be used on your production floor and should not be rinsed clean with water.

  1. When you're done printing, scrape excess ink from the screen.
  2. Apply EasiSolv 110 by squirt bottle, pneumatic sprayer, or rag to the (well) ink side of the screen.
  3. Thoroughly agitate ink with a rag or scrubber, then wipe up all dissolved ink.
  4. Reapply if necessary and follow with a dry rag, wipe on both sides of the screen.

The screen will be ready for printing or tape application within 20 seconds.

Remove all ink and emulsion from the screen

Apply EasiSolv 701 stain remover to the (well) ink and print side of the screen and scrub

High-pressure rinse on both sides of the screen

Slowly flood rinse your screen to activate degreasing agent.

Technical Data Info

Appearance

Clear Yellow Liquid

Odor

Mild

PH

Neutral

Flash Point

48° C / 118° F

VOC

950 grams/liter

DOT Shipping

This product ships non-hazardous

Safety Precautions

Product Identifier: EasiSolv 110 Solvent Cleaner

General Use: Cleaner

Click here to Download

If medical advice is needed, have product container or label at hand.

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof ventilating equipment. Use only non-sparking tools. Take precautionary measures against static discharges. Avoid breathing mist, vapors. Wash hands, forearms and face thoroughly after handling. Wear protective gloves and eye protection. In the case of inadequate ventilation, wear respiratory protection.

If swallowed: rinse mouth. Do NOT induce vomiting.

If on skin: Wash with plenty of water.

If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.

If skin irritation or rash occurs: Get medical advice/attention.

In case of fire: Use foam, carbon dioxide (CO2), dry extinguishing powder, sand to extinguish.

Store in well-ventilated place. Keep cool. Store in closed container.

Dispose of contents/container in accordance with local/regional/federal regulations.

ChemTel USA, Canada, Puerto Rico & U.S.Virgin Islands: (800)-255-3924

MANUFACTURER +1(813) 248-0585

ChemTel International (Call Collect)

Easiway Systems Contract Number: MIS3609005