EasiStrip™ SUPRA Ink Cleaner and Emulsion Remover (For Dip Tank)

$51.05
Shipping calculated at checkout.
Size: Gallon

Two-in-one Ink Cleaner and Emulsion Remover designed to soften ink and emlusion from the mesh. This product is best when used in a dip tank.

    Description & Features

    ** This product is for use in a dip tank **

    EasiStrip Supra One Step Ink Cleaner & Emulsion Remover is designed to dissolve plastisol inks and remove emulsion from the screen printing mesh at the same time. This product is for use in a dip tank for superior time and chemical savings. EasiStrip Supra is an ultra-concentrated liquid designed to be mixed with water 1:7 while remaining homogenous. With EasiStrip SUPRA, textile screens can be cleaned for pennies by combining many of the cleaning processes into one.  EasiStrip SUPRA is a zero VOC, low odor, non-flammable, non-hazardous product that will provide the benefits of less labor, less expense, and improved efficiency to the screen cleaning and reclaiming operation. This concentrated one-step ink & emulsion remover is designed to be used as part of the Easiway dip tank system.

    Features:

    • For use in a dip tank (Mix 1 part chemical to 7 parts water)
    • Zero VOCs
    • Low Odor
    • Non-flammable
    • Non-hazardous
    • No Shelf Life 
    Ink Compatibility
    • Plastisol
    • Waterbased
    Safety & Technical Data Sheets

    Download > Safety Data Sheet

    Download > Technical Data Sheet

    Size: Gallon

    Directions for Use

    Mix EasiStrip SUPRA at a ratio of up to 1:5 with water in a plastic tank.

    • Scrape excess ink from screen.
      Place screen in dip tank.
    • Let soak in tank until the emulsion/film loosens from the screen. Usually 2-3 mins.
    • High pressure rinse screen, then flood rinse.
    • If stubborn stains remain, apply an Easiway Systems approved stain remover.

    Technical Data Info

    Appearance

    Clear Liquid

    Odor

    Mild

    PH

    2-3

    Flash Point

    N/A

    VOC

    N/A

    DOT Shipping

    This product ships non hazardous

    Safety Precautions

    Product Identifier: EasiStrip Supra One Step Ink Cleaner & Emulsion Remover

    General Use: Emulsion Remover

    CLICK HERE TO DOWNLOAD

    If medical advice is needed, have product container or label at hand. Keep out of reach of children. Read label before use.

    Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves. Wear eye or face protection. Wash hands thoroughly after handling.

    IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: get medical advice/attention.

    IF ON SKIN: (or hair): remove/take off immediately all contaminated clothing. Rinse skin with water/shower.

    Immediately call a doctor, a poison center. Get medical advice/attention if you feel unwell.

    If skin irritation or rash occurs get medical advice/attention.

    Take off contaminated clothing and was it before reuse.

    Store in well-ventilated place. Keep cool. Store in closed container. Dispose of contents/container in accordance with local/regional/federal regulations.

    ChemTel USA, Canada, Puerto Rico & U.S.Virgin Islands: (800)-255-3924 

    MANUFACTURER +1(813) 248-0585 

    ChemTel International (Call Collect)

    Easiway Systems Contract Number: MIS3609005