EasiSolv 55 NH Stencil Remover Concentrate

EasiSolv 55 NH Stencil Remover Concentrate Special Features:

• EasiSolv 55 NH does not ship as a hazardous commodity, reducing shipping and storage hazards and expense.

• EasiSolv 55 NH is an economical liquid concentrate, which easily mixes with water at a ratio of 1 part chemical to 30 parts water, up to 1 part chemical to 55 parts water, providing unparalleled cost effectiveness.

• EasiSolv 55 NH is a biodegradable liquid which simplifies use, disposal and environmental concerns.

• EasiSolv 55 NH is an aggressive stencil stripper on all commonly used stencil systems which will cover the majority of needs, on all mesh, without leaving emulsion haze.

• EasiSolv 55 NH mixes with water faster and more thoroughly than powders, which eliminates the waste generated by undissolved solids.

 

EasiSolv 55 NH Stencil Remover Concentrate Application:

For use in a dip tank:

• Mix EasiSolv 55 NH at a ratio of 1:30 up to 1:55 with water in a plastic tank.
• Scrape excess ink from screen.
• Place screen in dip tank.
• Let soak in tank until the emulsion/film loosens from screen, usually just a couple of minutes.
• High pressure rinse screen, then flood rinse.
• If stubborn stains remain, apply an EasiWay Systems, Inc. approved stain remover, scrub and flood rinse.

For manual use:

• Mix EasiSolv 55 NH at a ratio of 1:30 up to 1:55 with water in a plastic container.
• Apply EasiSolv 55 NH by brush, wipe, scrub pad or spray to both sides of emulsion/film, after ink has been removed.
• High pressure rinse both sides of the screen.
• Flood rinse entire screen with low pressure rinse from the top to remove any debris, splash back and chemical residue.
• If stubborn stains remain, apply an EasiWay Systems, Inc. approved stain remover and high pressure rinse.